CSJunkies

Nice setup steveplatinum :up: We tried this also, you want to make sure that the surface you have the scales on is flat and level. Katsumi used a big cutting board and used a level in the middle of the scales. If you have your ride height equal left and right (front Left and right & and rear lef...

Does it snap the cvds on both sides or just one? Maybe check the bearings on the knuckles, your cvds shouldn't snap so easily when the oneway grips/engages.

Picture of the battery you are trying to charge will help us figure out what is the problem

I was thinking about a Turnigy 5000mAh 2S 7.4V 20C and a iMAX B6 Charger. Turnigy's aren't bad. Since it's the holidays look up Gens Ace ( Hobby Partz ) or Hobby People for deals on their batteries. For the iMax B6 Charger you would need a power supply to power it. There are some chargers that have...

Great review and thank you for sharing

mikep415 wrote:Looks great

Agreed Looks awesome

So much sex!!!

S!ck!!!

Lovin it!!! That red is hot

10 spots left

Sign ups on the RCDC forum : http://www.rcdriftclubonline.com/forum/ ... f=3&t=7094

Moat pulleys are universal. Inner dai. should be 4mm. If it uses a pin there might be problems lining it up. Ones w a set screw will work, just need a flat spot in the shaft.

Clean!!! Love it

I wanna say that the broadtech c-hubs for the TAO5 fit the TC-FD

http://www.broadtech.hk/eagleshop/shop/ ... 862-810-SI

Mostly everythings all done. Just needs the front/rear lights, dash, and rear diffuser. Hardware all painted 20130323_093805.jpg Overspray film off, so shiny :D 20130324_160021.jpg 20130324_160027.jpg 20130324_160051.jpg 20130324_164254.jpg Stickers all cut up *-| 20130325_041243.jpg And all sticker...

Painted the hexes w a pearl, then backed w black along w the window/light trims & bodylines.

Thanks Mike

First color metallic blue backed w white





next color up is floro yellow, but before that need to peel off masks and clean up bleeds

Yellow done, now the hex masks

I used it on this RX-7

http://driftercentral.com/forums/index. ... miya-rx-7/

Will look into it, thanks for your input

Working on another body for a friend ( valentin ) :D This ones taking sooooo long, not body, just to get the motivation to do work on it :lol: :P Windows, window trim, head/tail lights, head/tail light trim, and body lines are all masked off *-| 20130319_013211.jpg 20130319_013231.jpg Had some left ...

S!CK!!!!

do you think it would be possible to convert a cyclone tc to this if i was to get the motor mounts, most of the parts look the same Negative, if you had the TCX then yes. just need the motor mount, bottom and top cf chassis pieces, and steering assembly. For the Cyclone TC you would need the TC-D m...

TQRC is this shiit! i asked them to stock the 3racing aluminum pulley gears. he stocked what he could get his hands on. 3racing is still out of stock on most. but the fact that he listened. Awesome. anyways i finally feel i got my chassis setup for this local drift track. Feels great now that i got...