Rounded vs flat?

Discuss the best tires to use on different surfaces.
User avatar
Sir Slide Alot
Still Turns In
Still Turns In
Posts: 153
Joined: Tue Nov 09, 2010 8:03 am
Drift Chassis: Yokomo DRB
Location: Belgium

Rounded vs flat?

Postby Sir Slide Alot » Wed Dec 01, 2010 8:20 am

I need some opinion's.

for full CS what's best? rounded tire or flat?

And how would angled tires be?
...Why so much smoke... Because drift car...

tamiya
Still Turns In
Still Turns In
Posts: 353
Joined: Tue Nov 23, 2010 11:47 pm
Drift Chassis: TA01/2/3/4/5/6, TBeIII/IV/5, TB03, ProD...
Location: Melbourne Australia

Re: Rounded vs flat?

Postby tamiya » Wed Dec 01, 2010 9:53 pm

is it just me or... whatever shape or contour you buy your tyres in, they'll stil wear flat to the ground...?

DorkyMK3
CSJ Elite
Posts: 146
Joined: Sun Jan 17, 2010 5:02 am
Drift Chassis: Hot Bodies/ HPI TC-FD cs2.0
Location: Bellflower, CA

Re: Rounded vs flat?

Postby DorkyMK3 » Thu Dec 02, 2010 1:48 am

^ Pretty much no matter how much your camber setup. The tires will eventually where back down to 0 degrees. Then you would start noticing your car's handling changes significantly.
"I got no money in the Bank, but im still going Sideways"
Image

User avatar
Sir Slide Alot
Still Turns In
Still Turns In
Posts: 153
Joined: Tue Nov 09, 2010 8:03 am
Drift Chassis: Yokomo DRB
Location: Belgium

Re: Rounded vs flat?

Postby Sir Slide Alot » Thu Dec 02, 2010 5:56 am

Not if you drift on carpet only...
...Why so much smoke... Because drift car...

DorkyMK3
CSJ Elite
Posts: 146
Joined: Sun Jan 17, 2010 5:02 am
Drift Chassis: Hot Bodies/ HPI TC-FD cs2.0
Location: Bellflower, CA

Re: Rounded vs flat?

Postby DorkyMK3 » Thu Dec 02, 2010 3:34 pm

^Very true! and Lucky, I go thru tires way too fast :(
"I got no money in the Bank, but im still going Sideways"
Image


Return to “Tires”

Who is online

Users browsing this forum: No registered users and 1 guest