HB Cyclone TC-H (Hiracchi Style) :D

Post your full Counter-Steer setup specs here.
pher0
Rally Style Drifting
Rally Style Drifting
Posts: 28
Joined: Sun Jun 24, 2012 6:14 pm
Drift Chassis: HB Cyclone TC
Location: London, UK

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby pher0 » Thu Jun 28, 2012 8:27 am

hey all could anyone point me in the direction of what pulleys will fit my cyclone?

cooper_xl
Rally Style Drifting
Rally Style Drifting
Posts: 69
Joined: Wed May 05, 2010 1:49 pm
Drift Chassis: TEH-R31
Location: Portugal

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby cooper_xl » Thu Jun 28, 2012 11:04 am

pretty much anything with a 4mm bore

search the new 3racing pulleys and Broadtech sells nice pulleys too

pher0
Rally Style Drifting
Rally Style Drifting
Posts: 28
Joined: Sun Jun 24, 2012 6:14 pm
Drift Chassis: HB Cyclone TC
Location: London, UK

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby pher0 » Thu Jun 28, 2012 3:27 pm

cheers mate, know of anywhere that ships quick?

cooper_xl
Rally Style Drifting
Rally Style Drifting
Posts: 69
Joined: Wed May 05, 2010 1:49 pm
Drift Chassis: TEH-R31
Location: Portugal

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby cooper_xl » Fri Jun 29, 2012 11:36 am

BroadTech ships very quickly...didn't try 3racing yet

pher0
Rally Style Drifting
Rally Style Drifting
Posts: 28
Joined: Sun Jun 24, 2012 6:14 pm
Drift Chassis: HB Cyclone TC
Location: London, UK

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby pher0 » Fri Jun 29, 2012 2:54 pm

i had look through the broadtech site and i found this, says its for ta05 though http://www.broadtech.hk/eagleshop/shop/ ... 860P18-20T also,the ones i have mount via a bit with a grub screw, will they be the same, sorry about the noob questions, but i only ever had shaft/2wd cars before now

cooper_xl
Rally Style Drifting
Rally Style Drifting
Posts: 69
Joined: Wed May 05, 2010 1:49 pm
Drift Chassis: TEH-R31
Location: Portugal

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby cooper_xl » Sat Jun 30, 2012 12:05 pm

That one has a 4mm bore but is held by a 2mm pin
You can't use it unless your pulley shaft is like this:

Image

pher0
Rally Style Drifting
Rally Style Drifting
Posts: 28
Joined: Sun Jun 24, 2012 6:14 pm
Drift Chassis: HB Cyclone TC
Location: London, UK

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby pher0 » Sat Jun 30, 2012 4:54 pm

ah thanks man, mine does have the pinholes a mm or two outside the spur holder but it also has indented sections either end for the grub screws like a motor shaft, should still work though it seems?

cooper_xl
Rally Style Drifting
Rally Style Drifting
Posts: 69
Joined: Wed May 05, 2010 1:49 pm
Drift Chassis: TEH-R31
Location: Portugal

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby cooper_xl » Sun Jul 01, 2012 12:41 am

I think so

pher0
Rally Style Drifting
Rally Style Drifting
Posts: 28
Joined: Sun Jun 24, 2012 6:14 pm
Drift Chassis: HB Cyclone TC
Location: London, UK

Re: HB Cyclone TC-H (Hiracchi Style) :D

Postby pher0 » Sun Jul 15, 2012 1:18 pm

just incase anyone else needs the same info, the 3racing pulleys are the perfect fit (4mm) :)


Return to “Counter-Steer Full Setup”

Who is online

Users browsing this forum: No registered users and 4 guests