Sreet Jam OTA-R Ver.2 FM

[Fitto]

My old Ta05 in new quality!!!
Make: Steet Jam
Model:Ota-R ver.2 + r31 suspension

Date:
Track surface:
Tire: T-drift
Motor & ESC: HW xtreme stock novak 10.5T
Front

Camber: -5 deg
Toe: +3
Kick up:2m
Caster hubs: 13 deg
Ride height:
Springs: Street Jam medium
Bumper weight:
Trailing Steering Block:
Sway-Bar:
Shock Oil: 250
Other:Dampers with Soft compression but Hard rebound.

Rear

Camber: -5 deg
Toe: ~3
Kick up:
Ride height:
Springs:Street JAm soft
Sway-Bar:
Shock Oil:250
Other:Dampers with Soft compression but Hard rebound.


Drive Train

Gearing:
Front:40/12 1way
Rear:36/20 solid
Spur:121t 64p
Pinion:30t 64p
Other: 50 deg steering lock

After







OTA-R31 suspension kit (c-hub 7caster)
;););)
50 degree steering

DIY belt tensioner

not 100% done, but close to it



I started with huge CS 22/30 un 12/40...= 144%...but it is too much for start (with ta05 i used 138% without problems :rolleyes: )


Almost max steering angle . No trouble at all with terrible noise

[chrisrex]

Im currantly doing the street jam kit on my Ta05 but I find that the swing arm comes up little short, Is that why you have like gangsta camber on your front to make it reach? let me know because I'm in a pickle

[Fitto]

Im currantly doing the street jam kit on my Ta05 but I find that the swing arm comes up little short, Is that why you have like gangsta camber on your front to make it reach? let me know because I'm in a pickle

I haven't big problem with too short shafts...In front i fixed it with 1way and some ehtra on 1way outer joins
In rear all was ok. Naw I'm waiting for shorter suspension mounts.

[tamiya]

yea SJ susp with std TA05 diffs seem to expect u to use crazy camber 7-10deg

dunno if the OTA-R31 has wider diff cups but my bones wouldn't
even sit inside the balldiff's cup at my usual camber.
I just bought some longer swingshafts to try.

[digi16v]

i only see half the image of the car.


The ta05 one way will come up short with the diff cups but the one way should have came with 2 black spacers. you can use them to push the cups out a little more. should be enough to get the dog dones to reach.

[chrisrex]

yea I got it to work, but i still got some chattering issues little dissapointed, but runs smoother

[Fitto]

a litle mod done:
CS 18/32 12/40 = ~1.88 ( 88%)
installed 4x suspension mounts "1d-1xd",
improved steering
camber
front -10
rear -8

[digi16v]

come to find out any chassis with the otar31 suspension has a chatter problem. some say put more grease on it.
give that a try. I have to break down my r31 so im gonna give that a try.
let us know if that worked for you.
do you have 0 ackerman using the 7* c-hubs? did you have to do a mod to get it at 0?
seen on another website that a mod has to be done.

[Fitto]

Nissan 180sx is coming soon

Front/rear bumpers










trying to make DIY light buckets






body kit

A smaal progress in my 180sx project

[Moolz]

Nice!
Still a big fan of the 180sx!

[Fitto]

update some new pic of chassis

[Fitto]

after i saw "rc mania" Front motor kit for ota-r, vdf ,i decided to do similar mod with my ota-r.
So here is my Ota-r + 16fm front motor mod!!!
not 100% done, but i like how it looks

.

.
[/

[artica]

looking reaaaally goood!

[Fitto]

[QUOTE=Fitto;623531]Still in progress
bumper holder problem is solved
still need to get 2 correct size belts and longer bodyposts
[/QUOTE]

[Fitto]

Just 2 nice pic

[R&B DRIFT]

Hey Fitto,

Do you have a few photos of the finished front motor mount?

[Fitto]

Hey Fitto,

Do you have a few photos of the finished front motor mount?

Hi!
I'm still looking for front/midle belt. I can't find eshop where is possible to purchase enroute jxr 234mm/231mm belt...

[R&B DRIFT]

Hey Fitto,

Do you have a few photos of the finished front motor mount?

Hi!
I'm still looking for front/midle belt. I can't find eshop where is possible to purchase enroute jxr 234mm/231mm belt...

http://www.robotmarketplace.com/product ... 231MM.html

Maybe this is the answer?

It has 77 teeth and is most likely to fit, I think ...
Another option, but expensive is this shop:

http://www.rcsmart.com.my/webshaper/sto ... ?catID=579

This is the cheapest option of the enroute belt:

http://www.helihantoys.com/en/44-enroute?p=2

Or the best quality option, the team tetsujin belts, they ship everywhere!

http://www.tetsujin.biz/32_231.html

Hope I helped you out with your project fitto!

[Fitto]

Thx, I already ordered from tetsujin, this morning

[R&B DRIFT]

Great! It'd be cool if you post some pics when it's finished

[Fitto]

My Front Motor ota-r is ready for 1. test run.
after test i 'll give summary and better pics