Baja's TA05

Post your full Counter-Steer setup specs here.
bajaboy5b
Rally Style Drifting
Rally Style Drifting
Posts: 83
Joined: Tue Jul 27, 2010 4:29 am
Drift Chassis: 3 VDFs :P
Location: Australia

Baja's TA05

Postby bajaboy5b » Sat Jul 07, 2012 10:24 am

After a short break from RC and selling of a VDF or two I'm building a new car.


Slow mass of parts is forming on my work table.

Image
In photo:

Square TA05 Counter Steer Front Pulley 40T

Square TA05 Counter Steer Center Pulley 20T

Active ABEC35 RB3 Bearings (for TA05 ver II.TRF416)

Active Hex Screw Set (for TA05 ver II) (AC345C)

M’s Racing Safety Cross Spider (for Tamiya)

Image
Also got a light bucket set.
Image

Image

Image

Image

Image

Image
Ok step one..... not stock anymore :P
Image

Image

Image
I like to sand my diff plates,I use a bit of 1000 grit sand paper taped to a bit of glass.
More on doing that here: http://www.rcshortcourse.com/forum/team ... -diff.html

Image

Image

Image

Image

Image
These were harder to ream out then what were on my VDF's.
Image

Image
And how it is till I get more parts.

Date:8/7/2012
Track surface: Concrete
Tire: R2 T drift
Motor & ESC:

Front

Camber:-4
Toe:
Kick up:2mm
Caster hubs:
Ride height:
Springs:
Bumper weight: TB03 one
Sway-Bar:N/A
Shock Oil:

Rear

Camber:
Toe:
Kick up:
Ride height:
Springs: stock
Sway-Bar:N/A
Shock Oil:

Drive Train

Front: 40
Center:16/20
Rear: 30
Spur:70t
Pinion:21t

-Jeremy
Team PINK!!!

User avatar
vimal
Still Turns In
Still Turns In
Posts: 170
Joined: Tue Apr 05, 2011 1:36 am
Drift Chassis: R31 RWD - OTA R31RS - TB EVO 5
Location: Cape Town, South Africa
Contact:

Re: Baja's TA05

Postby vimal » Mon Jul 09, 2012 2:31 am

Awesome :D, I'm going be busy with my TA05 shortly and this is perfect for me to follow :up:
Image

bajaboy5b
Rally Style Drifting
Rally Style Drifting
Posts: 83
Joined: Tue Jul 27, 2010 4:29 am
Drift Chassis: 3 VDFs :P
Location: Australia

Re: Baja's TA05

Postby bajaboy5b » Tue Jul 31, 2012 8:58 pm

Image

Image

Image
Rather deep. :P
Image

Image


-Jeremy.
Team PINK!!!

User avatar
valve_timing
Still Turns In
Still Turns In
Posts: 285
Joined: Sat Oct 22, 2011 4:19 pm
Drift Chassis: Yokomo Drift Package type cm
Location: dayton ohio

Re: Baja's TA05

Postby valve_timing » Tue Jul 31, 2012 9:29 pm

nice update i like this build thread

User avatar
vimal
Still Turns In
Still Turns In
Posts: 170
Joined: Tue Apr 05, 2011 1:36 am
Drift Chassis: R31 RWD - OTA R31RS - TB EVO 5
Location: Cape Town, South Africa
Contact:

Re: Baja's TA05

Postby vimal » Wed Aug 01, 2012 3:41 am

Looking forward to seeing how this comes along :D
Image

User avatar
valve_timing
Still Turns In
Still Turns In
Posts: 285
Joined: Sat Oct 22, 2011 4:19 pm
Drift Chassis: Yokomo Drift Package type cm
Location: dayton ohio

Re: Baja's TA05

Postby valve_timing » Wed Aug 01, 2012 7:29 pm

yes me too

User avatar
Moolz
Still Turns In
Still Turns In
Posts: 130
Joined: Wed Aug 17, 2011 11:28 am
Drift Chassis: Tamiya TA05 GRT - 102%, TT01 (50/50)
Location: Johannesburg
Contact:

Re: Baja's TA05

Postby Moolz » Sun Sep 02, 2012 7:57 am

Any updates?

bajaboy5b
Rally Style Drifting
Rally Style Drifting
Posts: 83
Joined: Tue Jul 27, 2010 4:29 am
Drift Chassis: 3 VDFs :P
Location: Australia

Re: Baja's TA05

Postby bajaboy5b » Wed Sep 05, 2012 9:53 am

Thanks everyone.

Updates soon once I get a few more parts,sorry for the lack of updates to the people who want to see them.I've been busy with school lately so yeah.

-Jeremy
Team PINK!!!

User avatar
valve_timing
Still Turns In
Still Turns In
Posts: 285
Joined: Sat Oct 22, 2011 4:19 pm
Drift Chassis: Yokomo Drift Package type cm
Location: dayton ohio

Re: Baja's TA05

Postby valve_timing » Wed Sep 05, 2012 10:02 pm

Yeah school sucks sometimes it consumes allot of time

User avatar
vimal
Still Turns In
Still Turns In
Posts: 170
Joined: Tue Apr 05, 2011 1:36 am
Drift Chassis: R31 RWD - OTA R31RS - TB EVO 5
Location: Cape Town, South Africa
Contact:

Re: Baja's TA05

Postby vimal » Thu Sep 06, 2012 3:58 am

bajaboy5b wrote:Thanks everyone.

Updates soon once I get a few more parts,sorry for the lack of updates to the people who want to see them.I've been busy with school lately so yeah.

-Jeremy


It's all good bud :up: School is worth it in the end, I'm doing my masters at the moment :up:
Image


Return to “Counter-Steer Full Setup”

Who is online

Users browsing this forum: No registered users and 5 guests