Team Samurai Project FC3S

Post the progress of R/C Body here.
User avatar
DK2B
Still Turns In
Still Turns In
Posts: 107
Joined: Sun Jan 22, 2012 11:20 pm
Drift Chassis: Drift Package Type C @ 1.8CS
Location: Peterborough, Australia

Team Samurai Project FC3S

Postby DK2B » Sat May 26, 2012 8:56 pm

Hey All,
This is my second ever attempt at customising an RC body.

It isn't 100% complete yet, but isn't far off. Just gotta finish a small touch up inside the body and then wait for the rest of the LEDs to arrive. This thing will have a total of 16 LEDs installed into it when finished, so it should be quite eye catching.

It has a FULL FLIP paint job and changes colour between a rusty kind of colour, orange and yellow. In some light it even gives the appearance of a deep reddish kind of colour, don't know how it happens, but it does.
The 'Lame Flake' just gave it that little extra Bling that I was looking for :)

I'm loving it and can't wait to test it on the Drift Package Type C, when the chassis is also completed :)

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Image

User avatar
RE-Xtreme
CSJ VIP
Posts: 155
Joined: Tue Oct 25, 2011 7:48 am
Drift Chassis: Dp SSG 1.8, DRB 1.5, DIB 275 1.8
Location: Australia
Contact:

Re: Team Samurai Project FC3S

Postby RE-Xtreme » Tue Jun 05, 2012 5:06 pm

Any reason why the wing is the wrong way around?

Looks simple and clean.
Visit me for more info on http://rextremerc.blogspot.com/

User avatar
DK2B
Still Turns In
Still Turns In
Posts: 107
Joined: Sun Jan 22, 2012 11:20 pm
Drift Chassis: Drift Package Type C @ 1.8CS
Location: Peterborough, Australia

Re: Team Samurai Project FC3S

Postby DK2B » Tue Jun 05, 2012 9:04 pm

Hey Russ,
Wing is wrong way around because silly me, screwed it on backwards and didn't pay any attention to it :lol: :lol: :lol: *-|

I will try to very carefully remove the sticker, turn the wing around and re-place the sticker back on :up:
Wish me luck!! :?

OHHH HOW EMBARRASSMENT :oops: :mrgreen:

** EDIT **
Wing has now been put on the right way :mrgreen: :up:

I also forgot to attach the video of my LEDs test. I did a quick test and have ordered the final set of red LEDs that is required to finish the LED system :up: :mrgreen:

http://youtu.be/x58Kl-gcX0M
Image

User avatar
DK2B
Still Turns In
Still Turns In
Posts: 107
Joined: Sun Jan 22, 2012 11:20 pm
Drift Chassis: Drift Package Type C @ 1.8CS
Location: Peterborough, Australia

Re: Team Samurai Project FC3S

Postby DK2B » Thu Jun 14, 2012 7:25 pm

Here's some updated pics of my FC3S Body [WIP]

I am still yet to get the paint to finish the final touch up inside, but am still assembling the LEDs and other components in preparation for the final installation.

I received the Twin Exhaust system today, have fitted them and taken these updated pics.
I have also tried to capture the 'FLIP' effect of the paint job and have kinda captured it :up:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Image


Return to “WIP Bodies”

Who is online

Users browsing this forum: No registered users and 3 guests