Pandora S13 ETS(Engineered to Slide) replica.

Post the progress of R/C Body here.
mikep415
Still Turns In
Still Turns In
Posts: 259
Joined: Tue Oct 04, 2011 1:10 pm
Drift Chassis: Yokomo DRB 1.8 CS
Location: San Diego

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby mikep415 » Wed Nov 28, 2012 1:28 pm

Alex Berlin wrote:Looks very nice :up:


thank you
Image

strangeconcept
What's CS?
What's CS?
Posts: 17
Joined: Mon Oct 01, 2012 2:55 am
Drift Chassis: Sakura D3 CS
Location: Portugal

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby strangeconcept » Tue Dec 04, 2012 4:36 am

hey man where did you get this body? is this the pandora sileighty?

cheers

nice work

mikep415
Still Turns In
Still Turns In
Posts: 259
Joined: Tue Oct 04, 2011 1:10 pm
Drift Chassis: Yokomo DRB 1.8 CS
Location: San Diego

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby mikep415 » Tue Dec 04, 2012 2:00 pm

strangeconcept wrote:hey man where did you get this body? is this the pandora sileighty?

cheers

nice work


I got this from tetsujin. Its the s13 coupe


update...sorta. fresh paint on the TE37 and took some outdoor shots. Better pics to follow

Image
Image
Image
Image
Image
Image
Image

Since my cast just got removed, i will be adding the cage and roll down windows soon. then it's finished.
Image

Emerpus
Rally Style Drifting
Rally Style Drifting
Posts: 38
Joined: Wed Sep 29, 2010 7:33 pm
Drift Chassis: Yokomo MR-4TC SD, Tamiya TT01
Location: SoCal

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby Emerpus » Wed Feb 27, 2013 2:32 pm

i love all your work! Just wondering but how and what do you use for the body lines?

mikep415
Still Turns In
Still Turns In
Posts: 259
Joined: Tue Oct 04, 2011 1:10 pm
Drift Chassis: Yokomo DRB 1.8 CS
Location: San Diego

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby mikep415 » Wed Feb 27, 2013 3:21 pm

Emerpus wrote:i love all your work! Just wondering but how and what do you use for the body lines?


thanks! I used a sharpie on this one and it didn't turn out too bad IMO. usually i use ABC line tape.

sadly, this body sold...
Image

Hornet
What's CS?
What's CS?
Posts: 6
Joined: Tue Oct 23, 2012 2:05 am
Drift Chassis: Tamiya TA-05 CS Eagle Conversion
Location: Netherlands

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby Hornet » Mon Oct 07, 2013 11:33 pm

Looks sick dude!Respect for the work.

What's the offset of those wheels? I'm thinking of getting the S13 myself.

rk3218
What's CS?
What's CS?
Posts: 3
Joined: Mon Oct 28, 2013 4:35 am
Drift Chassis: sakura s zero
Location: Australia

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby rk3218 » Thu Oct 31, 2013 5:49 am

Image
Image

I'm trying to figure out how you got the whole car black then removed it? Im guessing you taped around the bits you wanted black then cut the protective layer off of just that section then panted it?

mikep415
Still Turns In
Still Turns In
Posts: 259
Joined: Tue Oct 04, 2011 1:10 pm
Drift Chassis: Yokomo DRB 1.8 CS
Location: San Diego

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby mikep415 » Thu Oct 31, 2013 1:08 pm

Hornet wrote:Looks sick dude!Respect for the work.

What's the offset of those wheels? I'm thinking of getting the S13 myself.

Thank you! wheels are 8mm spice TE37 in metallic silver? painted white.
Image

mikep415
Still Turns In
Still Turns In
Posts: 259
Joined: Tue Oct 04, 2011 1:10 pm
Drift Chassis: Yokomo DRB 1.8 CS
Location: San Diego

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby mikep415 » Thu Oct 31, 2013 1:09 pm

rk3218 wrote:Image
Image

I'm trying to figure out how you got the whole car black then removed it? Im guessing you taped around the bits you wanted black then cut the protective layer off of just that section then panted it?


I just peeled off the area that I needed to paint and masked it off. sprayed the black but made sure the entire body was covered minus the areas needed for paint. once dried off, I took the whole film off
Image

rk3218
What's CS?
What's CS?
Posts: 3
Joined: Mon Oct 28, 2013 4:35 am
Drift Chassis: sakura s zero
Location: Australia

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby rk3218 » Fri Nov 01, 2013 1:20 am

Righto, thanks.

Integraxdc2
Rally Style Drifting
Rally Style Drifting
Posts: 46
Joined: Wed Feb 24, 2010 9:14 pm
Drift Chassis: Sakura D3 (work in progress)
Location: California

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby Integraxdc2 » Tue Dec 03, 2013 1:49 am

That's good looking! Nice work :up:
1995 Acura Integra GS-R Sedan (DB8)

TeXRuS
What's CS?
What's CS?
Posts: 2
Joined: Mon May 12, 2014 12:01 pm
Drift Chassis: MST MS-01D Version S
Location: Russia

Re: Pandora S13 ETS(Engineered to Slide) replica.

Postby TeXRuS » Fri May 16, 2014 3:47 am

It's Awesome! U r Gold-Handy! Maybe i missed it but what is the number of paint on the upper part of car?


Return to “WIP Bodies”

Who is online

Users browsing this forum: No registered users and 4 guests