Shaft for r31

Discussion for anything counter-steer RC drifting!
Dakky
Rally Style Drifting
Rally Style Drifting
Posts: 40
Joined: Mon Jan 30, 2012 2:57 pm
Drift Chassis: Tamiya TT-01
Location: Croatia

Shaft for r31

Postby Dakky » Thu Dec 27, 2012 7:28 am

anyone knows for good and cheap shaft for teh-r31\ota-r31 wit more angle - i have fm conversion from eagle racing?

around 10-20 usd :)

Thanks :)
https://www.facebook.com/DTJ232 -------->DTJ-Drift Team Jazbina <-----------
https://www.facebook.com/CRCDRIFT ------>CROATIAN RC DRIFT TEAM<-----

Fitto
Rally Style Drifting
Rally Style Drifting
Posts: 61
Joined: Wed Jan 26, 2011 12:53 am
Drift Chassis: Street Jam OTA-R ver.2
Location: Latvia

Re: Shaft for r31

Postby Fitto » Thu Dec 27, 2012 11:01 am

Dakky wrote:anyone knows for good and cheap shaft for teh-r31\ota-r31 wit more angle - i have fm conversion from eagle racing?

around 10-20 usd :)

Thanks :)

i' m using r31 suspension and original Street Jam cvd's ,50deg., without problems if you want more... look for some overdose or similar, but thei arent cheap

ridinvintage
Still Turns In
Still Turns In
Posts: 154
Joined: Thu Jan 05, 2012 9:35 pm
Drift Chassis: TA-05 GRT 2.14cs, OTA-R31 in the works
Location: Pennsylvania
Contact:

Re: Shaft for r31

Postby ridinvintage » Thu Dec 27, 2012 1:12 pm

what about eagle racing, I use them they're pretty good no problems in over a year.

Dakky
Rally Style Drifting
Rally Style Drifting
Posts: 40
Joined: Mon Jan 30, 2012 2:57 pm
Drift Chassis: Tamiya TT-01
Location: Croatia

Re: Shaft for r31

Postby Dakky » Thu Dec 27, 2012 1:45 pm

ridinvintage wrote:what about eagle racing, I use them they're pretty good no problems in over a year.


do you have a link for it?
https://www.facebook.com/DTJ232 -------->DTJ-Drift Team Jazbina <-----------
https://www.facebook.com/CRCDRIFT ------>CROATIAN RC DRIFT TEAM<-----

ridinvintage
Still Turns In
Still Turns In
Posts: 154
Joined: Thu Jan 05, 2012 9:35 pm
Drift Chassis: TA-05 GRT 2.14cs, OTA-R31 in the works
Location: Pennsylvania
Contact:

Re: Shaft for r31

Postby ridinvintage » Thu Dec 27, 2012 1:55 pm

check the length on yours they offer a few different sizes.
http://www.broadtech.hk/eagleshop/shop/ShopProductDetail.aspx?id=R31-15

multi-bash
Still Turns In
Still Turns In
Posts: 188
Joined: Sun Apr 10, 2011 4:27 pm
Drift Chassis: OTA-R31 on Novak. Xray T2 009, gone.
Location: Seattle, WA

Re: Shaft for r31

Postby multi-bash » Thu Dec 27, 2012 4:58 pm

you could also mod the current ones with a dremel and cutting bit. Check where the dogpin rubs against the cvd block and start grinding slowly. I did this with my Xray ECS shafts and gained a significant angle advantage. The tricky park is keeping it all smooth to there's no chatter (or you can just dial back the end point)
-=Raincity Raji Kon=- Senior Building Reconnaissance Advisor - Hit me up to drift in the 206/425!
http://www.facebook.com/raincityrajikon
http://raincityrajikon.blogspot.com/
OTA-R31 - CS and eagle'd out in goooold, Novak GTBII + Balistic 8.5t


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests