Help, Keyence Tachyon aria / tao set up

Discussion for anything counter-steer RC drifting!
User avatar
HAYASHI
Rally Style Drifting
Rally Style Drifting
Posts: 32
Joined: Tue Dec 06, 2011 3:37 am
Drift Chassis: RC-ART Crimson Lightening,Street Jam OTA ZEON MK3
Location: Australia

Help, Keyence Tachyon aria / tao set up

Postby HAYASHI » Wed May 15, 2013 3:45 pm

Ok need a little help just got my keyence set up running and cant find on the TAO where to set the lipo cut off.
I get to the COV screen but cant see how to set for lipo in the manual it says these cut offs i have pasted bellow can be set but cant see the option to do so on the TAO

can be set
Ni-cd / Mi-MH / Li-Fe・・・4.5/4.8/5.0/5.2/5.5/5.8/6.1V
Li-Po 2-cell
・・・6.6/6.9V, Li-Po 3-cell
・・・9.9/10.4V
All i am seeing is this and cant find any other options
ImageThis is the highest setting i can see
Can any one help??
How do i set the cut off to 6.6 for my lipo ??
http://dangerstylerc.blogspot.com.au/

valentin
Site Admin
Site Admin
Posts: 202
Joined: Tue Jan 05, 2010 8:16 pm
Drift Chassis: D-Like Re-R
Location: Garden Grove, CA
Contact:

Re: Help, Keyence Tachyon aria / tao set up

Postby valentin » Wed May 15, 2013 4:13 pm

That setting is perfectly fine. 3.2v will put you in a "safe" range. Some people prefer higher, or lower...I set my ESCs at 3.0v per cell for my drift chassis....if it's grip or offroad, i set it slightly higher at 3.2v

User avatar
HAYASHI
Rally Style Drifting
Rally Style Drifting
Posts: 32
Joined: Tue Dec 06, 2011 3:37 am
Drift Chassis: RC-ART Crimson Lightening,Street Jam OTA ZEON MK3
Location: Australia

Re: Help, Keyence Tachyon aria / tao set up

Postby HAYASHI » Wed May 15, 2013 5:10 pm

Ok thanks Valentin if you think that is fine i will stick with that setting for now.I just don't want to kill any of my lipo's
I would still like to know how to set it higher if anyone knows be cause it will annoy me until i know how to set it haha
http://dangerstylerc.blogspot.com.au/

valentin
Site Admin
Site Admin
Posts: 202
Joined: Tue Jan 05, 2010 8:16 pm
Drift Chassis: D-Like Re-R
Location: Garden Grove, CA
Contact:

Re: Help, Keyence Tachyon aria / tao set up

Postby valentin » Thu May 16, 2013 9:35 am

HAYASHI wrote:Ok thanks Valentin if you think that is fine i will stick with that setting for now.I just don't want to kill any of my lipo's
I would still like to know how to set it higher if anyone knows be cause it will annoy me until i know how to set it haha


No problem :up: . You don't run a chance of "killing" your lipos as long as the cells do not get discharged below 3.0v per cell.


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest