fliped steering for more drift angle

Post all of your steering modifications to get more angle and to fix ackerman on your chassis.
SUBRMN
Rally Style Drifting
Rally Style Drifting
Posts: 31
Joined: Fri Jan 21, 2011 4:19 am
Drift Chassis: VDF 1.87 CS AN VDF 50/50
Location: DARGAVILLE NEW ZEALAND AOTEAROA

fliped steering for more drift angle

Postby SUBRMN » Tue Apr 19, 2011 3:40 am

i have turned steering motor and steering servo around for more steering angle so that steering arms dont hit lower arm fixing block any more

Image
Image
Image
Image
IM STILL LEARNEN HOW BOUT YOU
Image

User avatar
stuffcc
Still Turns In
Still Turns In
Posts: 274
Joined: Sun Jan 17, 2010 1:59 am
Drift Chassis: TAMIYA TA05 VDF-FBD CS1,76
Location: FRANCE
Contact:

Re: fliped steering for more drift angle

Postby stuffcc » Tue Apr 19, 2011 9:52 am

Nice mod on steering, motor and... caster !
It's the lowers arms from yoki DP type-C ?
Viewed them that they are in aluminium too, but prefered to takes plastic ones.
Is that hard to setup caster and camber with upper arms ?
For the motor (mount), I believed to do like you but didn't find reason for... :lol:
Image
- Blog - YT channel -
"I try to do as well as brand made"
"Drifting sux, RC Drifting's better !"
"(RC) Drifting made my life"

SUBRMN
Rally Style Drifting
Rally Style Drifting
Posts: 31
Joined: Fri Jan 21, 2011 4:19 am
Drift Chassis: VDF 1.87 CS AN VDF 50/50
Location: DARGAVILLE NEW ZEALAND AOTEAROA

Re: fliped steering for more drift angle

Postby SUBRMN » Tue Apr 19, 2011 3:49 pm

thanks for that bro
yep you are correct those are dp type c lower arms
it is not hard to set up for caster and camber and it is very very sturdy just as strong as the standard c hubs ay i did motor switch and that, as i turned my steering arms were hitting the blocks the hold the lower arm rods in cheers so i flipd around to raise steering arms above those lower arm blocks but to do so i had to swap over motor servo etc

havent had a good jam on it yet since moding but hope to do so sune yeah
IM STILL LEARNEN HOW BOUT YOU
Image

User avatar
QuangVuong
Rally Style Drifting
Rally Style Drifting
Posts: 56
Joined: Tue May 18, 2010 11:54 pm
Drift Chassis: Yokomo MR4TC BD, Tamiya TA-05F(Fijon), HPI Pro D
Location: Villawood, Sydney
Contact:

Re: fliped steering for more drift angle

Postby QuangVuong » Wed Apr 20, 2011 3:36 pm

Nice what are those green 3 racing parts?
Image

CS'd Yokomo MR4TC-BD 67% - Reedy Stockstar and Novak GT7 - Bluebird BMS-630MG - GT3B

CS'd Tamiya TA-05F(Fijon) 100% - EZrun 9T 35A Brushless System - Futaba BLS451 - GT3B

SUBRMN
Rally Style Drifting
Rally Style Drifting
Posts: 31
Joined: Fri Jan 21, 2011 4:19 am
Drift Chassis: VDF 1.87 CS AN VDF 50/50
Location: DARGAVILLE NEW ZEALAND AOTEAROA

Re: fliped steering for more drift angle

Postby SUBRMN » Wed Apr 20, 2011 8:37 pm

3racing alloy Y links for the Axial AX10 they are for rock crawlers
lower arm is lower arm for yokomo SD type c
IM STILL LEARNEN HOW BOUT YOU
Image


Return to “Steering”

Who is online

Users browsing this forum: No registered users and 1 guest