Page 1 of 1

Square SSG/TA05 RWD

Posted: Sun Jul 24, 2016 3:10 am
by squirt22
Hey all, seems like forever since i have posted anything on here or do a right up on anything,

been out of drifting for a little while now, due to work and other commitments (kids and moving house)

So here is what i managed to come up with as a prototype for getting maximum Steering out of stock tamiya ta05 suspension arms and knuckles and c hubs on my Sqaure Converted TA05

I converted it to rwd, removed front diff,belt,pulley,driveshafts etc.

here are pics, as how it currently is, this is just a prototype out of some MDF i had laying around, will get around to CNCing one up soon.




image2.JPG


Once it is all CNCed and putt in place it should work out awesome,
only Cons of this is i am finding that i need to run a decent amount of toe in, which i dont like, at this stage it is just a prototype and will be looking at ways to make it completely adjustable but still give you the same maximum steering lock.

Re: Square SSG Steering mod

Posted: Wed Jul 27, 2016 2:11 am
by squirt22
So here is the current update>>

Made out of Alloy Flat bar, slightly redesigned, but works very well, also managed to eliminate the toe in/out issue with the flat bar,

Will continue to test various setups before finalising them to be put into CNC batch, advanatge of the CNC batch is that i can have pre-drilled threaded holes in various positions for different setups,

Re: Square SSG/TA05 RWD

Posted: Tue Oct 18, 2016 3:44 am
by westek
That is a good steering mod.Do you have the dimensions?