Page 1 of 2

TT-01 Staszek Dorifto Factory (SDF)

Posted: Sun Oct 17, 2010 10:56 pm
by Staszek
Hi,
i want to present mine CS Chassis |O|
First it was normaly tt-01 |:-|
Image


Then i made CS 1.3 and new steering :up:
Image


Image

Image

Image

Image
Next bought M-03 Shafts for little more angle :D
Image

And then i bought this... :wtf:
Image

... and this :o

Image

So i have CS 1.97 *-|

Image
Image

That was stock angle...: :Ono

Image

... and new angle O:)
Image
Image

Yes probably you will tell me that investing in TT is useless but i love this chassis and dont have in mine plans chaning it :)
Now need to find some set up for me :D

If some mistakes sry for mine english and all comments are welcome :roll:
regards

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Wed Oct 20, 2010 1:30 pm
by DorkyMK3
Nice Build! I was in the same boat with you about the tt-01. You can sink all the funds into it, and by the time your done, its still a tt-01 but an awesome one.

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Oct 21, 2010 1:35 am
by psychopat
sickest tto1 ive ever seen nice build

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Oct 21, 2010 1:46 pm
by Staszek
Hehe in my and mine friends opinion it's more like Tb Evo than tt now xD Here is some video in action:
http://s837.photobucket.com/albums/zz30 ... 4&newest=1
Sry for bad quality but i'ts only phone attached to body xD And because of balance it's not so good drifting xD
But you can see TT can counter steer too XD

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Sat Nov 06, 2010 10:41 am
by rudeboy03
Hey nice setup. I'm currently awaiting the arrival of the eagle drift chassis for tt01 and I ws wondering if you couldprovide feedback on your personal experience with the mod. I also have the active hobby 1.44 rear overdrive kit along with a number of mods. A few quick questions: 1) how'd you do the akkerman steering mod on the eagle racing chassis? (2 what camber set up are you running? 3) Does the eagle racing chassis improve the handling characteristics of the tt01d?I ask this last question because its difficult to maintain nice drift angles with the active hobby overdrive. Finally what did you do to achieve 1.98 overdrive?

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Sat Nov 06, 2010 4:17 pm
by Staszek
There is no ackerman mod ;D steeering setup is from this set :) nothing added :) actualy i have camber 8* and 8* caster :) but ill increase it beacause of mine new angle:
Image
Image

Graphite tt-01 is more like tb-evo than normal tt-01 :) its not a drifting "brick" but now its real drifting chassis :D
And cs is Front 39/11 and active cs 36/20. 11t is from Carson Stormracer:
Image

regards :)

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Mon Nov 08, 2010 10:39 pm
by DorkyMK3
I am looking forward to getting the Eagle Racing tt-01 drift chassis. Nice steering angle! Do you get wheel chatter with that much angle?

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Tue Nov 09, 2010 1:44 am
by Staszek
Surprisingly none chatter :D i can cut some hump on axle for sure ill try it for next drift session :)

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Wed Nov 10, 2010 5:02 pm
by rudeboy03
OK, First i wanna THANK YOU AGAIN for posting your awsome build for others to see |O| . i recently recieved the eagle drift chassis and am almost done assembling. im proud to be part of the "tt01/eagle hybrid drift crew" and can hardly wait to test run. All thats left to do is add electronics and servo. Assembly is straight forward if your experienced with tt01 chassis although instructions were not very clear(all japanese) . I do however have a few concerns and wanted to get your feedback on a few issues im having |:-| . maybe you had similar issues qwith your build and have found ways to correct them.

1st) the eagle chassis looks awsome but the exposed pinion/spur gear worries me. Although running indoors would probably be best for longevity/integrity of gear life, its not likely as i live in a small appartment. :oops: ther question i have is, have yoiu experienced any issues with the exposed gear and what size spur/ pinion are you running. I have a 55t pinion and 24-25t spur, i think :Think:

2nd) being that the chassis is graphite, did you prep the edges by sanding and aplying CA glue? Any special techniques?

3rd) I have a 3racing front one way installed in the front gear box and ive installed a plastic shim in front of each of the bearings on the oneway but there seems to be some play between the gearbox holes and bearings. did you experience this issue and how did you install the shims to reduce play and get a tight seal.

4th) The drivetrain seems to be very stiff compared to a lightly modded tt01 chassis drivetrain. i think this may be due to the front one way bearing issue stated or the gear box is not a good fit( not sure though) :wtf: . i added a little lube to the front and rear diff bearings but the drivetrain still tight. did you experience this and if so any advice?

5th) SORRY, ill make this my last question even though ive got a few more. I got 3racing front/rear camber/caster adjustable arm kits installed INSTEAD of the tt01D arms. The max camber angle is no where near even the tt01Dmax so im curious as to how you achieved 8 deg negative camber *-| . how is your suspension set up and what aftermarket parts are you using besides eagle racing chassis parts.

Any advice or held you could give would be greatly appreciated. Im currently at work but will be home soon to (hopefully) finish the build. when im done ill be sure to pose pics for you to see if your interested. Thank you for your time.

Cheers!

ohh almost forgot, im dying to see your chassis in action but the video link not working :?

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 5:10 am
by Staszek
I'm glad that i can smb help with tt-01 :)

1) Hmm i'm running only indoors on the carpet, so i dont have any problems with this :) I'll make second tt-01 for outdoors but more for winter fun and 50/50 gymkhana or smth like that ;pp xD I'm using 9t Ezrun Combo, and im using 61/22 gears :) it is perfect for me :)

2)I asked more experienced friends should i use CA glue, but they said that it's actualy done from factory :)

3)With one way i have still little bit problems :) Because im using M-03 Swing shafts, even with lot's of spacers i have a bit floats. But mine 11t Gear from Stormracer is metal so if one way gears will bash il buy new one on rcmart for 2$ xD For now mine one way gear isnt in bad condition still working and thats the most important thing :)

4)Are you using CVD or standard Dog Bones? Maybe you have too close pinion and spur?

5)As you can see i'm using rear arms on the front :) Like some guy from japanesse blog :) It's great :) I Checked and mine maximum camber would be 32* xD But i think 15 is max for good driving :) I have original tamiya suspension arm set :) And 3 racing dumpers

Hmm dunno why this video not working but i have it here: http://www.youtube.com/watch?v=nfvOXO8rOug as i wrote before soz for quality :)

Regards

P.S. If you have more questions just ask them ill try to answer for them :)
P.S.2 Sry for mine english :)

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 5:58 am
by abdul basit
Staszek wrote:cs is Front 39/11 and active cs 36/20. 11t is from Carson Stormracer:


What modifications did you have to do to make the gears fit?

... That is by far the awesomest TT01 out there!

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 6:01 am
by Staszek
Hmm... for Stormracer gear none mods:D just few spacers :) and on the rear to not brush cs set 0,75mm spacers on the left side (near gear) and 0,5mm on the right side :) that's all :)

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 6:35 am
by abdul basit
Sweet!

You should post a video from outside, not the cockpit view, that'll be cool!

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 6:48 am
by Staszek
Ill try make video on next meeting :) maybe toworrow or on Saturday :)

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 9:59 am
by abdul basit
Staszek wrote:Ill try make video on next meeting :) maybe toworrow or on Saturday :)


Sweet, looking forward to watching it. :)

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 10:24 pm
by rudeboy03
so i finally got the chassis finished and had it running for about 2 minutes before the power suddenly died. I then realized that the lock pin in the pinion gear was loose ad had come out of the pinion. The problem is that the bushing that holds the pin into the pinion gear seems to have too much room/space. I already lost one pin and im trying to decide how to secure the lock pin. How did you secure the pinion lock pin on your chassis?

In the picture you can see the space between the pinion gear and the lock bushing. Did you use extra bearing or washers to secure the lock pin? super glue maybe?

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Thu Nov 11, 2010 11:44 pm
by Z-HiDE
Tried Treadlock/Loctite?

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Fri Nov 12, 2010 3:45 am
by Staszek
I modified a little gear :D http://img683.imageshack.us/img683/3610/zdjcie490.jpg
i used bearing that it dont have almost any space :) extra i used hot glue and it's perfect xD

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Sun Nov 14, 2010 12:03 pm
by Staszek
http://www.youtube.com/watch?v=Zh3WiEjM068 SDF in action :) I still need lot's of practice :) as you can see few mistakes :D but i think it's not so bad xD

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Mon Nov 15, 2010 12:12 am
by Sir Slide Alot
Not bad at all.

i think getting at the fault-less level takes years.

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Tue Nov 23, 2010 12:39 pm
by Staszek
Because mine old steering didnt work with caster in practice :D i made new one xD:
Image

Image

i only changed arms position and used tamiya turnbackles xD and i made a posts from left eagle racing rollers from motor heating and from bumper :) :
Image

And moved dumpers :
Image

Soz for bad photos :)

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Tue Nov 23, 2010 1:35 pm
by tokeyo83
moved

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Tue Nov 23, 2010 4:36 pm
by rudeboy03
so i have set up the eagle drift chassis but have trouble after a few runs. the drivetrain is binding somewhaere or is very stiff and it causes the esc to overheat. ive rebuilt the chassis 3 times already and cannot figure out what to do next. i try to copy your steering mod but the steering arm does not reach the front hub. what modification did you use to improve steering (long posts)? i have universal tt01 shaft joint and 3racing camber arms with 4 degrees negative camber and caster :Think: Did you have to lube any part of the drivetrain to eliminate binding or use shimms to run smoothly? im running a sport tuned motor and 25t esc. the esc uverheats after 20 minutes. please any advice is appreciated. post more pics to see what you did please :D
thanks :up:

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Tue Nov 23, 2010 4:42 pm
by rudeboy03
Ohh and i also wanted to know how the new steering setup works for you? id love to see footage of it in action with the letest steering mods. ill be ordering he m03 arms soon so maybe i can post a decent video for you if the drivetrain issue gets resolved. great job so far A++

Re: TT-01 Staszek Dorifto Factory (SDF)

Posted: Wed Nov 24, 2010 3:50 am
by Staszek
hmm maybe too close spur and pinion?? you need try some washers but you need try few options. i dont know how much your shafts etc are used maybe you have too much washers and it stiff :)